Bosch DVR 440 - Menu Default Values; Table 9.1 Quick Install Menu Default Values; Table 9.2 Configuration Menu Default Values

86 en | Menu default values Digital Video Recorder 440/480 Series
AM18-Q0605 | v2.0 | 2012.04 Installation and Operation manual Bosch Security Systems
9 Menu default values
The following tables list the items of the menu system of the unit. The Default value column
shows the values that are restored when the factory defaults item of the System settings
menu is selected. An N in the Reset column means that this value is not reset when the
factory defaults are recalled.
Table 9.1 Quick Install menu default values
Navigation Setting Default value Reset
International Language English Y
Time zone GMT+0 N
Time format 12-hour N
Time 0:00 N
Date format YYYY-MM-DD N
Continuous
Recording
Cameras 1-4 Resolution CIF Y
Video quality Normal Y
Frame rate 30 (NTSC)/25 (PAL) Y
Convert Off Y
Network Setup DVR ID 01 Y
DHCP Enabled N
IP address 0.0.0.0 N
Subnet mask 0.0.0.0 N
Gateway 0.0.0.0 N
Table 9.2 Configuration menu default values
Navigation Setting Default value Reset
Camera Camera Cameras 1 ~ 4/8 Enable On Y
Name Camera 1~4/8 Y
Covert Off Y
Audio None Y
Video Adjustment Cameras 1 ~ 4/8 Brightness 50 Y
Contrast 50 Y
Color 50 Y
PTZ Cameras 1 ~ 4/8 COM Port None Y
Control ID 00 Y
Protocol Bosch Y
Baud Rate 9600 Y
Continuous
Recording
Cameras 1 ~ 4/8 Resolution CIF Y
Quality Normal Y
Frame rate 30(NTSC)/25(PAL) Y
Input Recording Cameras 1 ~ 4/8 Resolution CIF Y
Quality Normal Y
Frame rate 30(NTSC)/25(PAL) Y
Motion Recording Cameras 1 ~ 4/8 Resolution CIF Y
Quality Normal Y
Frame rate 30(NTSC)/25(PAL) Y
Network Live
Streaming
Channels 1 ~ 4/8 Enabled On Y
Resolution CIF Y
Quality Normal Y
Frame rate 15(NTSC)/12.5(PAL) Y