72 en | Configuration menu Digital Video Recorder 440/480 Series
AM18-Q0605 | v2.0 | 2012.04 Installation and Operation manual Bosch Security Systems
6.6.5 Configuration
Figure 6.23 System - Configuration
– Import configuration will load previously saved system settings from a USB memory
device.
– Export configuration saves a copy of the system settings to a USB memory device.
– Select Factory defaults to reset the settings in the menu system to their default values.
– Update firmware checks a USB memory device when connected for a new version of the
unit software. Once started, the unit must not be powered off until the update is
completed. See Section 2.1.3 Firmware upgrades.
– Quick install opens the Quick install menu that was first presented when the unit was
powered on when received from the factory.
To Next Page
Loading...
