Check the general settings on this screen:
–
If they are correct, press <Next step> to go to the next Startup wizard screen (Encoder
settings).
– If changes are required, use the drop-down menus and entry fields to assign the correct
settings then <Next step> to move to the Encoder Startup wizard screen (if you change
the system time and/or date, click <Save> before continuing).
Encoder
Figure 4.5: Startup encode
Assign here the encoder settings and click <Next step> for the next Startup wizard screen
(Schedule settings). To save time when setting up channels, use <Copy> to copy settings from
one channel to other(s).
4.4.3
24 en | Quick install
DIVAR 3000/5000 Digital Video
Recorder
2013.05 | 1.0 | DIVAR 3000/5000 Digital Video
Recorder
Operator Manual Bosch Security Systems
To Next Page
Loading...
