– For monitor B – see Sequence Mon B, page 79
Activate sequence on monitor A
1.
To view a sequence of live camera pictures from several cameras:
– Right-click the mouse to access the Quick menu
– Choose Sequence on
2. Check that a sequence of camera pictures appears,
3. To stop sequencing, right-click the mouse to access the Quick menu, and choose
Sequence off
Monitor A
Monitor A is the main monitor. It shows full-screen, quad or multiscreen live or playback
camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
is the default monitor for keyboard and mouse commands.
Monitor B
Monitor B displays full-screen, quad or multiscreen (with or without sequence) of live
pictures. When an alarm or motion input is detected, the camera picture with the Alarm/
Motion indicator can be displayed on monitor B. When multiple alarms or motion occur,
camera pictures are sequenced on monitor B.
Search/Play
Click Search/Play in the Main Menu (or from the Quick menu) for the following interface. See
following figure
Figure 7.10: Search screen
7.2.4
7.2.5
7.3
DIVAR 3000/5000 Digital Video
Recorder
Operating instructions | en 93
Bosch Security Systems Operator Manual 2013.05 | 1.0 | DIVAR 3000/5000 Digital Video
Recorder
To Next Page
Loading...
