Bosch FLEXIDOME IP indoor 8000i - IP54 Protection Kit: Final Fastening and Sealing; Tightening Cover Screws and Fitting Grommet

22 en | Hardware installation FLEXIDOME IP indoor 8000i
2021-08 | 01 |
Installation manual
Bosch Security Systems B.V.
12. Tighten the three screws of the IP54 cover between 0.6 and 0.8Nm (0.44 and 0.59ft-lb).
13. Push the M20 rubber grommet down into the IP54 cover and ensure it’s fitted correctly
all around to ensure a waterproof seal.