Bosch FLEXIDOME IP indoor 8000i - Specialized Mounts and Fiber Optic Kits; Specialized Wall;Pipe Mounts and Media Converters; Removing the Camera from Installation; Detaching Camera Module from Mounting Plate

30 en | Hardware installation FLEXIDOME IP indoor 8000i
2021-08 | 01 |
Installation manual
Bosch Security Systems B.V.
NDA-U-WMTG Universal wall mount,
compatible with gang box
installation for fixed dome
cameras only, white.
NDA-U-PMTG Universal pipe mount,
compatible with gang box
installation for fixed dome
cameras only, white.
VG4-SFPSCKT Ethernet media converter
video transmitter/data
receiver fiber optic kit
SFP-2 SFP Fiber Optic Module, 2km
(1.2miles), 2LC connectors.
Multi-mode, 1310mm.
SFP-3 SFP Fiber Optic Module,
20km (12.4miles), 2LC
connectors. Single-mode,
1310nm.
SFP-25 SFP Fiber Optic Module, 2km
(1.2miles), 1SC connector.
Multi-mode, 1310/1550nm.
SFP-26 SFP Fiber Optic Module, 2km
(1.2miles), 1SC connector.
Multi-mode, 1550/1310nm.
6.5 Removing the camera
1. Untighten the 4 captive screws of the screw holes in the camera module.
2. Push the camera upwards and rotate counterclockwise to un-click it from the mounting
plate.