Bosch FLEXIDOME IP indoor 8000i - Camera Commissioning and Initial Setup; Initial Setup via PoE and Project Assistant App; Project Assistant App Configuration Guide

32 en | Commissioning FLEXIDOME IP indoor 8000i
2021-08 | 01 |
Installation manual
Bosch Security Systems B.V.
7 Commissioning
With the remote commissioning functionality, only a PC or a mobile device is needed to pan,
tilt, roll, and zoom (PTRZ), and point the camera to the required field of view - without ever
having to remove the camera from the box.
Do the commissioning locally at the camera via WiFi network if it’s available using the Project
Assistant app, available for iOS, Windows or Android, or by connecting remotely to the camera
via the network using the Project Assistant app, the camera’s web interface, or the
Configuration Manager.
To commission the camera using the Project Assistant app:
1. Connect the network cable to the PoE.
2. Download the Project Assistant app.
3. Do the necessary steps to configure the device. Use the step-by-step instructional video
for help.
https://youtu.be/Xw3QUk8AHx0
If required, re-commissioning can be done at any time.
i
Notice!
The remote commissioning functionality (PTRZ) of the camera is designed as installation aid
for first set-up or adjustments at a later moment in time.