FLEXIDOME IP indoor 8000i Hardware installation | en 25
Bosch Security Systems B.V.
Installation manual
2021-08 | 01 |
2. Align the camera according to the conduit installation.
– If the installation of the mounting plate was done without the conduit (A), align the
silver triangle on the conduit door with the red circle on the mounting plate.
– If the installation of the mounting plate was done with the conduit (B), align the
cutout with the conduit installed on the mounting plate.
3. Push the camera against the mounting plate and turn the camera clockwise until it clicks
into place. Make sure that the camera module is secured.
To Next Page
Loading...
