40 en | Maintenance FLEXIDOME IP indoor 8000i
2021-08 | 01 |
Installation manual
Bosch Security Systems B.V.
2. Release the reset button.
3. Wait 60 seconds for the LED light to turn off and for the reset to be complete.
4. Close the lid of the microSD card compartment.
5. Tighten the thumb screw of the microSD card compartment by hand.
6. If the camera was mounted, the camera module can now be re-attached to the mounting
plate. For more information on how to install the camera module, refer to
Installing the
camera module, page 24
.
To Next Page
Loading...
