Bosch FLEXIDOME IP starlight 8000i - 4 Preparing for installation

FLEXIDOME IP starlight 8000i Preparing for installation | en 11
Bosch Security Systems B.V.
Installation manual
2024-02 | V02 | F.01U.404.121
4 Preparing for installation
4.1 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all parts are included. If any items are missing, notify your Bosch Security
Systems sales or customer service representative.
The original packaging is the safest container in which to transport the unit and can be used
if returning the unit for service.
4.2 Contents
Quantity Component
1 Mounting plate
1 Camera module
1 Camera base
1 Conduit plate
1 Conduit cover: pre-installed on conduit plate
2 Conduit plate hole adapters: M25 (3/4in.) - pre-installed on
conduit plate - and M20 (1/2in.)
1 Conduit hole adapter rubber: for diameters less than M20
(1/2in.)
1 Screw
2 Grommet (1 spare): for waterproofing network cable