Bosch FLEXIDOME IP starlight 8000i - 5 In-box configuration

16 en | In-box configuration FLEXIDOME IP starlight 8000i
2024-02 | V02 | F.01U.404.121
Installation manual
Bosch Security Systems B.V.
5 In-box configuration
In-box configuration of the camera can be done via a wired connection with the camera still
inside the box, by using a mobile device or PC.
1. Connect a network cable with PoE, and wait 1 minute for the camera to power up.
2. Connect and configure the camera via the wired network by using the web interface,
the Project Assistant app or the Configuration Manager.
For more detail about the Project Assistant app, refer to Commissioning.
i
Notice!
The provided patch cable is only intended for in-box configuration. Dispose of the patch
cable after the in-box configuration is successfully completed.