FLEXIDOME IP starlight 8000i Hardware installation | en 17
Bosch Security Systems B.V.
Installation manual
2024-02 | V02 | F.01U.404.121
6 Hardware installation
Caution!
Do not remove the bubble to move the camera lens manually.
The lens system is motorized for easy commissioning. Moving these parts manually will
break the gears and damage the camera. In order to move or focus the camera lens, always
use the motorized PTRZ controls mentioned in this manual. Removal of the bubble is only
allowed for bubble replacement.
Installation overview
The installation of the camera follows these steps:
1. Installing the mounting plate, page 18.
2. Installing the camera base, page 22.
3. Installing the camera module, page 28.
To Next Page
Loading...
