FLEXIDOME IP starlight 8000i Hardware installation | en 23
Bosch Security Systems B.V.
Installation manual
2024-02 | V02 | F.01U.404.121
5. If there are auxiliary connections, puncture a hole in the rubber of the secondary cable
inlet (2) in the camera base to put them through. The diameter of the whole must be
between 5 and 8mm (0.2 and 0.3in.).
The network cable inlet (1) is for the network cable only.
1 Network cable inlet. 2 Secondary cable inlet for additional
cabling. It is waterproof if not in use.
3 Protective breathing vents. Do not
remove or break the sealing from
these holes.
To Next Page
Loading...
