FLEXIDOME IP starlight 8000i Hardware installation | en 27
Bosch Security Systems B.V.
Installation manual
2024-02 | V02 | F.01U.404.121
Without conduit With conduit
10. If necessary, connect the auxiliary wires to the terminals supplied (refer to Wiring, page
13).
11. Connect the terminals to their related connectors.
Moisture protection
1. Remove the desiccant tablet from the bag.
After removing the desiccant tablet from the bag, installation must be completed in less
than 10 minutes.
2. Attach the desiccant tablet with the adhesive side facing the camera base. Make sure
not to cover the vents with the desiccant.
To Next Page
Loading...
