ICP-CC408 | Installation Guide | Contents EN | 3
Bosch Security Systems, Inc. | 12/08 | F01U089463-02
Contents
1.0 Introduction........................................................8
1.1 ICP-CC408 Features .........................................8
1.2 Quick Start..........................................................8
1.2.1 Setting the Date and Time................................9
1.2.2 ICP-CC408 Zone Defaults ...............................9
1.2.3 Zone Types.........................................................9
2.0 Programming......................................................9
2.1 Programming with the Remote Codepad ....10
2.2 Programming with the Programming Key...10
2.3 Programming Option Bits ..............................11
2.4 Installer’s Programming Commands ............11
2.4.1 Command 959 – Test the Programming Key11
2.4.2 Command 960 – Exit Installer's
Programming Mode ........................................12
2.4.3 Command 961 – Reset the Control Panel to
Factory Default Settings..................................12
2.4.4 Command 962 – Copy the Control Panel
Memory to the Programming Key................12
2.4.5 Command 963 – Copy the Programming
Key to the Control Panel................................12
2.4.6 Command 964 – Erase the Programming
Key.....................................................................13
2.4.7 Command 965 – Set Up Domestic Dialing
Format...............................................................13
2.4.8 Command 966 – Enable/Disable the
Automatic Stepping of Locations ..................13
2.4.9 Command 999 – Display the Panel Type or
Software Version Number..............................14
2.5 Disable Factory Defaults.................................14
3.0 Codepad Indicators .........................................16
3.1 ICP-CP508W Eight Zone LED Codepad ....16
3.2 ICP-CP508LW Eight Zone LCD Codepad .17
3.3 ICP-CP500PW Master Partitioned LED
Codepad............................................................18
4.0 System Operations...........................................19
4.1 Arming the System in AWAY Mode ...........19
4.2 Disarming the System from AWAY Mode..20
4.3 Arming the System in STAY Mode 1 ..........20
4.4 Disarming the System from STAY Mode 1.21
4.5 Arming the System in STAY Mode 2 ..........21
4.6 Disarming the System from STAY Mode 2.22
4.7 Codepad Duress Alarm ..................................22
4.8 Codepad Panic Alarm.....................................22
4.9 Codepad Fire Alarm .......................................22
4.10 Codepad Medical Alarm ................................22
4.11 Isolating Zones.................................................23
4.11.1 Standard Isolating............................................23
4.11.2 Code to Isolate.................................................23
4.12 Fault Analysis Mode....................................... 23
4.13 Fault Descriptions ........................................... 24
5.0 Remote Radio Transmitter Operations ....... 25
5.1 Indications from Remote Radio Transmitter
Operations ....................................................... 25
5.2 Remote Radio User Code Priority Levels... 26
5.3 Changing or Deleting Remote Radio User
Codes................................................................ 26
5.4 2-Channel Remote Radio Hand-Held
Transmitter Operations.................................. 26
5.4.1 Arming in AWAY Mode............................... 27
5.4.2 Disarming from AWAY Mode ..................... 27
5.4.3 Arming in STAY Mode 1.............................. 27
5.4.4 Disarming from STAY Mode 1 .................... 27
5.4.5 Panic Alarm ..................................................... 27
5.5 4-Channel Remote Radio Hand-Held
Transmitter Operations.................................. 27
5.5.1 Arming in AWAY Mode............................... 27
5.5.2 Disarming from AWAY Mode ..................... 28
5.5.3 Arming in STAY Mode 1.............................. 28
5.5.4 Disarming from STAY Mode 1 .................... 28
5.5.5 Panic Alarm ..................................................... 28
5.5.6 Remote Outputs.............................................. 28
6.0 System Functions ............................................ 28
6.1 Installer Code Functions................................ 28
6.1.1 Set the Number of Days until the First Test
Report............................................................... 29
6.1.2 Changing Domestic Phone Numbers........... 29
6.1.3 Change Telco Arm/Disarm Sequence......... 30
6.1.4 Setting STAY Mode 2 Zones ........................ 31
6.1.5 Satellite Siren Service Mode.......................... 32
6.1.6 Turning Telephone Monitor Mode On and
Off ..................................................................... 32
6.1.7 Walk Test Mode.............................................. 32
6.1.8 Event Memory Recall Mode......................... 32
6.2 Master Code Functions .................................. 33
6.2.1 Arm or Disarm Both Areas at the Same
Time.................................................................. 33
6.2.2 Changing and Deleting User Codes............. 33
6.2.4 Changing Domestic Phone Numbers........... 35
6.2.5 Change Telco Arming/Disarming Sequence36
6.2.6 Setting STAY Mode 2 Zones ........................ 37
6.2.7 Turning Outputs On/Off ............................... 38
6.2.8 Setting the Date and Time............................. 38
6.2.9 Walk Test Mode.............................................. 38
6.2.10 Event Memory Recall Mode......................... 38
6.3 User Code Functions...................................... 39
6.3.1 Arming or Disarming Both Areas at the
Same Time....................................................... 39
6.4 Hold-Down Functions.................................... 39
6.4.1 Arming the System in AWAY Mode........... 39
To Next Page
Loading...
