Bosch MKK-040 - Page 16

16/62 Bosch Rexroth AG Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08
Magnetic sensor with M8x1 plug
f Position the sensor (8) in the respective slot (S) in the frame and secure it by turning the clamping screw
(9). The sliding block (10) is not necessarily required for mounting, it is only required for repeatable
mounting of the sensor.
6.5.3 Switch mounting arrangement MKK/MKR -065/-080/-110/-140-NN-3
Fig�13: Magnetic sensor MKK/MKR -065/-080/-110/-140-NN-3
Fig�14: Proximity sensors and mechanical switches MKK/MKR -065/-080/-110/-140-NN-3
Proximity sensors and mechanical switches
X Assembly ! 6.5.10 / 6.5.11
S = Slot for magnetic sensor
2,5
+0,2
0,4
+0,2
S (MKK)
S (MKR)
2,5
+0,2
0,4
+0,2
S
S
2,5
+0,
2
0,4
+0,2
MKK/MKR-065
MKK/MKR-080
MKK/MKR-110
MKK/MKR-140
5
5
5
2
2
2
3
3
3
8
S
9 10