Bosch MS 6 - Configuring CAN Output Messages

7 | CAN Configuration
64/76 Engine_Control_Unit_MS_6.x_Manual Bosch Motorsport
7.3 CAN Output
7.3.1 Output configuration
Create new CAN output message
Export RaceCon CAN output configuration
to file
Import RaceCon CAN out configuration
from file
Display CAN bus properties (Baudrate)
7.3.2 Create new CAN output message channel
Double-click on any CAN bus item, to open the "CAN messages overview".
1. Select ‘Add CAN-OUT’ and choose the desired CAN bus for the new output channel.