The All‑in‑One Unit is the main product of the All‑in‑One System and integrates the following
components:
– a 240 W mono mixer amplifier.
– SD and USB player that can play MP3 encoded files from SD and USB devices.
– a digitally controlled AM/FM-tuner for receiving radio stations.
Up to six microphones and three auxiliary source signals can be connected to the mixer
amplifier and mixed, with priority or VOX switching. The output signal can be routed to six
different zones with individual attenuation control. The unit can be extended with an
additional power amplifier, e.g. LBB1935/20, as a spare amplifier or for 2‑channel operation.
– PLN‑6CS Call Station
The PLN‑6CS Call Station is a remote device for making announcements to selected zones of
the All‑in‑One System. A maximum of six Call Stations can be connected in a daisy chain
configuration to the All‑in‑One Unit using Cat‑5 cables terminated with RJ45 connectors.
– PLN‑4S6Z Wall Panel
The PLN‑4S6Z Wall Panel is used to remotely control the All‑in‑One Unit. It is connected to the
All‑in‑One Unit using a Cat‑5 cable terminated with RJ45 connectors.
– PLE‑1CS or PLE‑1SCS Call Station
The PLE‑1CS or PLE‑1SCS Call Station is an all‑call call station that can be used with the
All‑in‑One Unit for making announcements without zone selection. It is connected to the
All‑in‑One Unit using a shielded Cat‑5 cable terminated with RJ45 connectors.
10 en | System Overview Plena All-in-One System
2014.09 | V1.2 | Installation and Operating Manual Bosch Security Systems B.V.
To Next Page
Loading...
