page heading
10
Symbols
Important: Some of the following symbols may be used on your tool. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the tool better and
safer.
Symbol Designation/Explanation
V Volts (voltage)
A Amperes (current)
Hz Hertz (frequency, cycles per second)
W Watt (power)
kg Kilograms (weight)
min Minutes (time)
s Seconds (time)
0 Off position (zero speed, zero torque...)
Arrow (action in the direction of arrow)
Type or a characteristic of current
Alerts user to read manual.
Alerts user to wear eye protection.
This symbol designates that this tool is listed by the Canadian Standards
Association, to United States and Canadian Standards.
Designates Li-ion battery recycling program.
1605A001CD GNB18V-12 202301.indd 10 1/9/23 2:07 PM
To Next Page
Loading...
