Bosch PROFACTOR GNB18V-12 - Trigger Lock; Built-in Work Light; Depth of Drive Adjustment

page heading
21
Operation
Trigger Lock
(Fig. 16, 17)
The Trigger Lock 3 is designed to prevent unin-
tended trigger activation.
To Unlock the Trigger:
Fully press the Trigger Lock 3 on the unlock sym-
bol side to unlock the Trigger 2 (Fig. 16).
To Lock the Trigger:
Release the Trigger 2, and fully press the Trigger
Lock 3 on the lock symbol side to lock the Trigger
2 (Fig. 17).
Built-in Work Light
(Fig. 1)
Your nailer is equipped with an LED Work Light
13 for better visibility when using the nailer.
The LED will stay on for 10 seconds after the
Trigger 2 is pressed.
Depth of Drive Adjustment
(Fig. 18)
The depth to which fasteners are driven into the
work piece can be adjusted using the Depth Set-
ting Switch 10 on the front of the nailer.
Slide the Depth Setting Switch 10 to the left to
increase the drive depth, as seen in (Fig. 18).
Slide the Depth Setting Switch 10 to the right to
reduce drive depth, as seen in (Fig. 18).
2
3
10
2
3
Fig. 16
Fig. 17
Fig. 18
1605A001CD GNB18V-12 202301.indd 21 1/9/23 2:07 PM