Bosch Rexroth 10 Series - Page 51

RE 91485-01-B/2021-11-18, BoschRexrothAG
Installation | A10FZO/G, A10VZO/G 51/72
Tabelle 29: Tightening torques for female threads and threaded plugs
Ports
Maximum permissible
tightening torque of female
threads M
G max
Required tightening torque
of threaded plugs M
V
WAF hexagon socket of the
threaded plug
Standard Thread size
ISO 6149 M8×1 10Nm 7Nm 4 mm
M10×1 30Nm 15Nm 5 mm
M12×1.5 50Nm 25Nm 6 mm
M14 × 1.5 80Nm 45Nm 6 mm
M16×1.5 100Nm 55Nm 8 mm
M18×1.5 140Nm 70Nm 8 mm
M20×1.5 170Nm 80Nm 10 mm
M22×1.5 210Nm 100Nm 10 mm
M27×2 330Nm 170Nm 12 mm
M30×2 420Nm 215Nm 17 mm
M33×2 540Nm 310Nm 17 mm
M42×2 720Nm 330Nm 22 mm
M48×2 900Nm 420Nm 22 mm
DIN 3852 M8×1 10Nm 7Nm
1)
3 mm
M10×1 30Nm 15Nm
2)
5 mm
M12×1.5 50Nm 25Nm
2)
6 mm
M14 × 1.5 80Nm 35Nm
1)
6 mm
M16×1.5 100Nm 50Nm
1)
8 mm
M18×1.5 140Nm 60Nm
1)
8 mm
M22×1.5 210Nm 80Nm
1)
10 mm
M26×1.5 230Nm 120Nm
1)
12 mm
M27×2 330Nm 135Nm
1)
12 mm
M33×2 540Nm 225Nm
1)
17 mm
M42×2 720Nm 360Nm
1)
22 mm
M48×2 900Nm 400Nm
1)
24 mm
ISO 11926 5/16-24 UNF-2B 10Nm 7Nm 1/8 in
3/8-24 UNF-2B 20Nm 10Nm 5/32 in
7/16-20 UNF-2B 40Nm 18Nm 3/16 in
9/16-18 UNF-2B 80Nm 35Nm 1/4 in
3/4-16 UNF-2B 160Nm 70Nm 5/16 in
7/8-14 UNF-2B 240Nm 110Nm 3/8 in
1 1/16-12 UN-2B 360Nm 170Nm 9/16 in
1 5/16-12 UN-2B 540Nm 270Nm 5/8 in
1 5/8-12 UN-2B 960Nm 320Nm 3/4 in
1 7/8-12 UN-2B 1200Nm 390Nm 3/4 in
1) The tightening torques for the threaded plugs are valid for the condition "dry" and "lightly oiled".
2) The tightening torques for the threaded plugs are valid for the condition "dry" – in the condition "lightly oiled", the tightening
torques for M10×1 are reduced to 10Nm and for M12×1.5 to 17Nm.