Bosch rexroth A21VG 10 Series - Environmental pollution due to incorrect disposal!; Danger due to chemical or aggressive environmental conditions!; Leakage or spilling of hydraulic fluid!; Danger due to heat development in components!

16/56 General instructions on damage to equipment and the product
Bosch Rexroth Corporation, A21VG Series 10, RE 93223-01-B/09.2020
NOTICE
Leakage orspilling ofhydraulic uid!
Environmental pollution and contamination oftheground water!
▶ Always place adrip tray under theaxial piston unit when adding and draining
thehydraulic uid.
▶ Use asuitable binding agent ifhydraulic uid isspilled.
▶ Observe thesafety data sheet for thehydraulic uid and thespecications
provided bythesystem manufacturer.
Danger due toheat development incomponents!
Adjacent products may bedamaged! Due toaheat development incomponents
(e.g. solenoids), adjacent products may bedamaged during assembly ifno
sufcient safety distance iscomplied with.
▶ When installing theaxial piston unit, check thesafety distances tonearby
products toensure that they are not damaged.
The warranty applies only to the delivered conguration.
The entitlement to warranty cover will be rendered void if the product is
incorrectly installed, commissioned or operated, or if it is used or handled
improperly.