Bosch rexroth A21VG 10 Series - Disposal; Extension and conversion

Disposal 47/56
RE 93223-01-B/09.2020, A21VG Series 10, Bosch Rexroth Corporation
12 Disposal
Careless disposal of the axial piston unit, the hydraulic uid and the packaging
material could lead to pollution of the environment.
Observe the following points when disposing of the axial piston unit:
1. Completely empty the axial piston unit.
2. Dispose of the axial piston unit and packaging material in accordance with the
national regulations in your country.
3. Dispose of the hydraulic uid according to the national regulations of your
country. Also observe the applicable safety data sheet for the hydraulic uid.
4. Remove the axial piston unit into its individual parts and properly recycle these
parts.
5. Separate according to, for instance:
– Castings
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit and/or its assembled parts.
Changes to settings on the customer side should only bemade using
theproduct-specic setting instructions.
The warranty from Bosch Rexroth only applies to the product asdelivered.
The warranty will be voided if the unit is modied or extended.
Adjusting the setting screws will render the warranty void. If you need to change
the settings, please contact your local contact person; you can nd their
contact information at
www.boschrexroth.com/addresses