Bosch rexroth A21VG 10 Series - Default Chapter; Table of Contents

RE 93223-01-B/09.2020, A21VG Series 10, Bosch Rexroth Corporation
3/56 Inhalt
Inhalt
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Display of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 6
1.3.3 Designations 7
1.3.4 Abbreviations 7
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 8
2.4 Personnel qualications 9
2.5 General safety instructions 9
2.6 Product-specic safety instructions 11
2.7 Personal protection equipment 13
3 General instructions on damage to equipment and the product 14
4 Scope of supply 17
5 Product description 18
5.1 Performance description 18
5.2 Product description 18
5.2.1 Assembly of the axial piston unit 18
5.2.2 Functional description 19
5.3 Product identication 20
6 Transport and storage 21
6.1 Transporting the axial piston unit 21
6.1.1 Transporting by hand 21
6.1.2 Transporting with lifting device 21
6.2 Storing the axial piston unit 23
7 Installation 25
7.1 Unpacking 25
7.2 Installation conditions 25
7.3 Installation position 27
7.3.1 Below-reservoir installation (standard) 27
7.3.2 Above-reservoir installation 28
7.4 Installing the axial piston unit 29
7.4.1 Preparation 29
7.4.2 Dimensions 29
7.4.3 General instructions 29
7.4.4 Installation with coupling 31
7.4.5 Installation on a gearbox 31
7.4.6 Installation with cardan shaft 32
7.4.7 Completing installation 32
7.4.8 Hydraulically connecting the axial piston unit 34
7.4.9 Electrically connecting the axial piston unit 38
7.5 Performing ushing cycle 38