BoschRexrothAG, RE91405-01-B/2021-05-21
6/52 A2FO series 70 | About this documentation
1�3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarification,
they are explained in the sections below.
1�3�1 Safety instructions
This documentation contains safety instructions in chapter2.6 "Product-specific
safety instructions" on page11 and in chapter3 "General instructions on property
damage and product damage" on page14, as well as before asequence of actions
or an instruction for action involving arisk of personal injury and property damage.
Always follow the measures for danger prevention associated with the use of
this product.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of noncompliance
▶ Danger prevention measures
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes what occurs if safety instructions are disregarded
• Precautions: states how the danger can be avoided
Table 2: Hazard classes as defined in ANSI Z535�6
Warning sign, signal word Meaning
DANGER
Identifies adangerous situation that will result in death or
serious injury if it is not avoided.
WARNING
Identifies adangerous situation that may result in death or
serious injury if it is not avoided.
CAUTION
Identifies adangerous situation that may result in minor to
moderate injury if it is not avoided.
NOTICE
Property damage: The product or surrounding area may be
damaged.