Bosch Rexroth CKL Series - Language Selection; Select Drive Parameter Language

Bosch Rexroth Corp., USL00010, 01.2015
7 Language Selection
7.1 Select the language for drive parameter names, units and diagnostic/
error messages
7.1.1 Stepsforconguringthedrivelanguage:
1. Select the Parameter Editor or Parameter Search window.
2. If opened the Parameter Search window, type “language” in the Text search box, and
select parameter S-0-0265 from the list.
3. Enter the desired language by typing one of the following values:
• 0 = German [factory default]
• 1 = English
• 2 = French
• 3 = Spanish
• 4 = Italian
If necessary, the IndraWorks user interface language setting can be changed by selecting
Tools → Options → Environment → Language.
14 Language Selection