Bosch Rexroth CKL Series - Easy Startup Mode; Configure and Start Easy Startup Mode

Bosch Rexroth Corp., USL00010, 01.2015
17 Easy Startup Mode
17.1Congureandstarteasystartupmode
17.1.1 Stepsforconguringeasystartupmode:
1. In the Explorer tree, select Easy Startup Mode.
2. Select Engineering Port (TCP/IP).
3. Press the Start Easy Startup Mode button to put drive in “Drive Ready” state (Ab).
4. If successful, Easy startup mode status is active and the Enable button is selectable.
30 Easy Startup Mode