Bosch Rexroth CKL Series - Page 23

01.2015, USL00010, Bosch Rexroth Corp.
12 Motor (continued)
12.2.1 Stepsforconguringthelinearmotorfromdatabase:(continued)
3. Enter the primary and secondary type codes based on the below table, then select the
Linear and Synchronous options.
System size Carriage length Primary part Secondary part
CKL 110 180 mm MCP030B-V180-NI-xxCN-NNNN MCS030-3S-xxxx-NNNN
240 mm MCP030C-V180-NI-xxCN-NNNN MCS030-3S-xxxx-NNNN
300 mm MCP030D-V180-NI-xxCN-NNNN MCS030-3S-xxxx-NNNN
CKL 145 244 mm MCP040C-V300-NI-xxCN-NNNN MCS040-3S-xxxx-NNNN
364 mm MCP040E-V300-NI-xxCN-NNNN MCS040-3S-xxxx-NNNN
484 mm MCP040G-V300-NI-xxCN-NNNN MCS040-3S-xxxx-NNNN
CKL 200 237 mm MCP070C-V300-NI-xxCN-NNNN MCS070-3S-xxxx-NNNN
297 mm MCP070D-V300-NI-xxCN-NNNN MCS070-3S-xxxx-NNNN
417 mm MCP070F-V300-NI-xxCN-NNNN MCS070-3S-xxxx-NNNN
xx: L0 = digital Hall, L1 = analog Hall, N0 = without Hall
xxxx: 0120, 0180, 0300 = secondary part length mm, select any value
4. Press the DB → Drive button to download the motor parameters to the drive.
23Motor