2.9 (4 knob) Spreader + 1Boom Anti-ice
This 4 knob configuration allows to run a standard spreader (Spinner, Conveyor, Prewet) and a single
boom Anti-ice simultaneously. The 4 knobs (leftright) are for Spinner, Conveyor, Prewet and Anti-ice.
2.10 (4 knob) Spreader + 3Boom Anti-ice
The 4 knobs (leftright) are for Spinner, Conveyor, Prewet and Anti-ice. It has 3 external switches
built in the armrest or a separate enclosure to switch booms On/Off. When a boom is ON the color of the
boom indication letter changes to RED.
2.11 (4 knob) Spreader + Cross Conveyor
The 4 knobs(leftright) are for Spinner, Conveyor, Prewet and Cross Conveyor. This requires a 4 knob
console with an external direction switch to control the cross conveyor direction that is displayed with the
RED dot at the bottom of the cross conveyor panel.
To Next Page
Loading...
