Bosch Rexroth CS660 - Spinner Forward and Reverse Operation; Combined Spinner and Conveyor Operation; Dual Spinner Selection and Indication

7/13
Bosch Rexroth Canada I December 2020 ı Revision 2.0
2.2 Spinner Forward and Reverse
The Spinner can work in either forward or reverse direction selected by a rocker switch wired to a
digital input of the 660 system. The Reverse is indicated by a red “R” in the spinner control panel.
2.3 Spinner & Conveyor Forward and Reverse
Both spinner and conveyor can work in either forward and reverse direction separately selected by a
switch. The Reverse is indicated by a red “R” in the Spinner and Conveyor control panels.
2.4 Dual Spinner
Dual spinner is selected by a switch. A red ‘D’ is displayed in the spinner panel when it is selected.
Spinner
reversing
Spinner
reversing
Conveyor
reversing
Dual spinner
enabled