2.5 3 Boom 3 Boom Anti-ice
This is a dedicated 3 boom Anti-ice set up. It has 3 boom switches built in the armrest or a separate
enclosure.
2.6 Air Gate
It uses an electrical switch to control an air cylinder to toggle between two gate positions. Turning on/off the switch
would toggle between two materials, and automatically set the operation gate to the calibrated gate for the material
selected.
2.7 Gate Read back and Automatic Gate
Gate Read back - A gate position sensor to monitor the actual gate position in real time. With the Read
back sensor operators do not need to enter on screen when adjusting gate position for different materials.