[7]
Error Messages – During the operation when an error occurs, a message will appear in the
notification area. Tap anywhere in the rectangle to acknowledge the warning.
Whenever there are warnings or errors, they are added to a list (log) in the notification area. To
clear the log, press and hold anywhere in the rectangle for 5 seconds with a PGM key inserted.
[8]
Gate Position– This indicates current gate position and control type (Auto, Readbk, AirGate, Man). The
gate position can be adjusted here when using a Manual gate. Please refer to the
Manual Gate Control section under Spreader Operation in this manual. Please refer to
the 660 Calibration Manual for setting up the gate control type.
2 Additional Feature Functions
2.1 Conveyor Forward and Reverse
The Conveyor can work in either forward or reverse direction selected by a rocker switch wired to a
digital input of the 660 system. The Reverse operation is indicated by a red “R” in the conveyor control
panel.
To Next Page
Loading...
