Bosch Rexroth CS660 - Operator Interface and Basic Operation; Display Units Overview; Key Information Displays; Configuration and Settings

3/13
Bosch Rexroth Canada I December 2020 ı Revision 2.0
1 Operator Interface and Basic Operation
Tap to change
material
Spinner
Rate
Normal, Pause,
Blast, Unload, &
Joy Mode
[3]
Vehicle speed
Press&hold 5s
to sim spd
[1]
Status/Totals:
Press&hold icon
5s to clear
(without key)
Press to
unload
GSS=0
[6]
Load WT
Press&hold 2s
To enter
[4]
Toolbox
LOG key for Log data
PGM key for parms
Set vol&dim level
[2]
Settings
(PGM key
required)
GSS>0
[7]
Error Messages
wipe up/dn to view
(OI & RC versions on
the last line)
Clear messages
(PGM key required)
Anti-ice rate
[8]
Gate Position
(tap to change)
Pre-wet
Rate
Turn: Pre-wet
Press: Momentary
Conveyor Reverse
Turn: Spinner
Press: Pause
Spreading
Rate
Turn: Anti-Icing
(If configured)
Turn: Conveyor
Press: Blast
CS-660 Display
CS-661 Display + Knob Console
Total dist & qty
[5]
Driver ID