Bosch Rexroth CS660 - Data Retrieval and Trip Summary Clearing

12/13
Bosch Rexroth Canada I December 2020 ı Revision 2.0
7 Data Retrieval & Clear Trip Summary
Two different types of data can be retrieved from the 660/661, Log data, and parameter data. To get
log data, you must use a 660 USB LOG Key. Parameter data, which is information about the current
configuration can be retrieved using a 660 USB PROGRAM Key. The system will detect the type of USB Key
inserted, so when the USB icon is pressed, the appropriate data will be downloaded to the Key.
With a ‘LOG DATA KEY’ inserted
Press the ‘USB’ symbol to transfer the log data.
With a ‘PROGRAMMING KEY’ inserted
Press the ‘USB’ symbol to transfer the parameter data.
Clear Trip Summary
With NO USB Key inserted. Press on the RPM icon to display trip summary information.
Press here
to transfer
log data
Confirmation
message
Press here
to transfer
parameter
data
Confirmation
message
Once this window is
visible, press and
hold the RPM icon
for 5 seconds
The oval buttons represent
the push buttons on the
handle of the joystick. When
a joystick button is pushed,
the proper mode or function
activated(illuminated in
red). The voice output
feature audibly lets the
operator know which mode
has been selected.
Direction
the joystick
handle
deflected.
Current
joy mode
selected
Confirmation
message