Bosch rexroth ctrlX SAFETY SafeMotion - Page 189

189 / 302
ctrlX SAFETY "SafeMotion"
First use
Bosch Rexroth AG
R911404905,
Edition 02
Fig. 83: Configuring the brake
Diagnostics Safe brake control
Using the link "Diagnostics Safe brake control" the diagnostic dialog of the
same name can be opened.
Fig. 84: "Diagnostics Safe brake control" dialog
Afterwards, the defined values have to be verified.
With the parameter verification, it is necessary to check/verify whether the
parameterization active in the drive complies with the parameters intended or
configured for this axis.
The parameter verification is carried out in ctrlX DRIVE Engineeringvia the
bottom sections of the SafeMotion dialogs (“verification display”).
Go to the next commissioning dialog by using the “Next >>” button.
Safety zone
In the “Safety zone“ dialog, configure the properties and the behavior of the
axis in conjunction with a ctrlX SAFETYlink safety zone.
Commissioning