ctrlX SAFETY "SafeMotion"
Compatibility 100Base-TX according to IEEE 802.3u
Recommended cable type
● According to CAT5e; shield type ITP (Industrial Twisted Pair)
●
Ready-made cables available for order:
–
RKB0021
Long cables (100 m at most) to connect the drive system to the
higher-level control unit or remote communication nodes.
Minimum bending radius:
48.75 mm with flexible routing
32.50 mm with permanent installation
Order code for a cable with a length of 30 m: RKB0021/030,0
–
RKB0013
Short cables to connect adjacent devices in the control cab-
inet.
Lenghts:
0.19 m; 0.25 m; 0.35 m; 0.55 m; 1 m; 1.25 m; 2 m; 3 m; 5 m;
7 m
Order code for a cable with a length of 0.55 m: RKB0013/00,55
Minimum bending radius: 30.75 mm
13.3
Motor connections
To Next Page
Loading...
