EasyManua.ls Logo

Bosch rexroth ctrlX SAFETY SafeMotion - Page 285

Bosch rexroth ctrlX SAFETY SafeMotion
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ctrlX SAFETY "SafeMotion"
Diagnostic display
Bosch Rexroth AG
R911404905,
Edition 02
Table 64: FSoE status, detailed diagnostics
PF41
Green
Meaning/cause Remedy
Continuous light Normal; communication ok -
Jittering, alternately with 1
pulse
Error S-parameter (TwinSaf
parameter)
As reading out the blinking pat-
tern is very difficult, the drive
additionally generates the error
F3452 in case of these errors.
Check configuration and correct
it, if necessary. If error occurs
again in spite of correct configu-
ration, please contact our service
department; they can read out
the exact cause of error by
means of detailed diagnostics.
Jittering, alternately with 2
pulses
Error I-parameter (individual
parameters)
Jittering, alternately with 5
pulses
Watchdog error
Jittering, alternately with 6
pulses
CRC error
Jittering, alternately with 7
pulses
Sequential number error
Jittering, alternately with 8
pulses
Communication error
Project planning

Table of Contents

Related product manuals