Easy Start Guide
7. How to operate the Inverter from the keypad
Page 7
This guide has been produced by The Inverter Drive Supermarket Ltd.
All content, including but not limited to graphics, text and procedures copyright The Inverter
Drive Supermarket and must not be reproduced or altered without prior written permission.
©
7.1 Use the dial to set the required speed.
The display will change to show the current speed
reference in Hz.
The minimum speed reference is defined by parameter
b1.07 and the maximum reference by b1.06.
7.2 Press the green “Run” button to start the motor.
Press the green button firmly to start the motor. The motor
will accelerate to the speed set in 7.1 (above) in the time
defined by parameter b1.20.
Motor speed can be changed whilst the motor is running by
rotating the dial clockwise (faster) or anti-clockwise
(slower). When the motor is running, the “Run” lamp will be
illuminated.
7.3 Press the red “Stop” button to stop the motor.
The red button will stop the motor.
The time taken (in seconds) to stop the motor is determined
by parameter b1.21.
Bosch Rexroth EFC 3600 Series Inverter
To Next Page
Loading...
