Bosch Rexroth IndraDrive HCS01 Series - Page 16

Description Symbol Unit
HCS0
1.1E-
W000
3-_-02
HCS0
1.1E-
W000
6-_-02
HCS0
1.1E-
W000
9-_-02
HCS0
1.1E-
W001
3-_-02
HCS0
1.1E-
W000
5-_-03
HCS0
1.1E-
W000
8-_-03
HCS0
1.1E-
W001
8-_-03
HCS0
1.1E-
W002
8-_-03
Output current (UL)
I
out
A 1,1 2,0 3,0 4,5 1,7 2,7 6,0 11,5
Output frequency range (UL)
13)
f
out
Hz 0...1600
Power dissipation at continuous
current and continuous DC bus
power respectively (UL)
14)
P
Diss_cont
W 8,00 10,00 12,00 20,00 11,00 46,00 80,00
120,0
0
Last modification: 2009-07-28
1) 2) 3) Housing dimension; see also related dimensional drawing
4) 5) 6) See fig. "Air Intake and Air Outlet at Device"
7) Observe supply voltage for motor holding brakes
8) HMS, HMD, HCS plus motor holding brake and control section; HCS01
including control section
9) DC bus L+, L-; mains input L1, L2, L3
10) Use listed AC input line fuses (class J; 600 V AC) or listed circuit break‐
ers (600 V AC) at the mains supply
11) Copper wire; PVC-insulation (conductor temperature 70 °C); installation
method B1; table 6
12) Copper wire; PVC-insulation (conductor temperature 90 °C); table
13.5.1; Ta ≤ 40 °C
13) Depending on switching frequency which was set in parameter P‑0‑0001
14) Plus dissipation of braking resistor and control section
Fig.3-1: HCS - UL Ratings and Dimensions
Distances
A Air intake
B Air outlet
C Mounting surface in control cabinet
d
top
Distance top
d
bot
Distance bottom
d
hor
Distance horizontal
Fig.3-2: Air Intake and Air Outlet at Device
14/65 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Instruction Manual
Ratings and Dimensions