2 Important Instructions for Use
2.1 Appropriate Use
2.1.1 Introduction
Bosch
Rexroth products represent state-of-the-art developments and manu‐
facturing. They are tested prior to delivery to ensure operating safety and
reliability.
The products may only be used in the manner that is defined as appropriate. If
they are used in an inappropriate manner, then situations can develop that may
lead to property damage or injury of personnel.
Bosch Rexroth, as manufacturer, is not liable for any damages re‐
sulting from inappropriate
use. In such cases, the guarantee and
the right to payment of damages resulting from inappropriate use
are forefeited. The user alone carries all responsibility of the risks.
Before using Bosch Rexroth products, make sure that all the pre-requisites for
appropriate use of the products are satisfied:
● Personnel that in
a way, shape or form uses our products must first read
and understand the relevant safety instructions and be familiar with ap‐
propriate use.
● If the product takes the form of hardware, then they must remain in the
original state, in other words, no structural changes are permitted. It its not
permitted to decompile software products or alter source codes.
● Do not mount damaged or faulty products or use them in operation.
● Make sure that the products have been installed in the manner described
in the relevant documentation.
2.1.2 Areas of Use and Application
The Rexroth IndraMotion MTX control is used to
● Programming contour and machining technology (feedrate, spindle
speed, tool change) or a workpiece.
● Guiding a machining tool along a programmed path.
Feed drives, spindles and auxiliary axes of a machine tool are activated via
SERCOS interface.
This additionally requires I/O components for the integrated PLC
which, in combination
with the actual CNC, controls the machining
process as a whole and also monitors this process with regard to
technical safety.
The unit may be operated only with the explicitly specified hardware
component configurations and combinations and only with the soft‐
ware and firmware specified in the appropriate documentations and
functional descriptions.
The Rexroth IndraMotion MTX has been developed for control tasks in multi-
axis installations.
Typical applications are:
● lathes
● milling machines
DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
Bosch Rexroth AG 9/141
Important Instructions for Use
To Next Page
Loading...
