6.4.6 Importing the Message File
We recommend that
you create the mzatexte.xxx file using an external editor
(utf8 format) and then transfer it to the CNC file system using IndraWorks En‐
gineering.
1: Double-click on the NC file system to open it.
2: Select the /usrfep directory and double-click on "Import…".
3: Select an mzatexte.xxx file to be imported to the hard disk.
4: Click on Import.
Fig.6-17: Importing the mzatexte.044 message file
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
74/141
PLC Startup
To Next Page
Loading...
