1 System Overview
1.1 Introduction
IndraMotion MTX
micro is the most cost-effective complete solution of the MTX
series, combining the CNC, MotionControl and PLC functionalities in a single
system. HCT02 for 3-axis applications and HCQ02 for 4-axis applications are
compact hardware units which incorporate control and drive controller assem‐
blies. All HMI functions are executed and displayed via the VDP80 control
panels.
Fig.1-1: MTX micro - summary
The MTX micro can be specified as turning machine (with
VDP80.1FAN-..
control
panel)
or as milling machine (with
VDP80.1FBN-.. control panel). The panels feature special ma‐
chine-type-related functions, e.g., a built-in handwheel (turning ma‐
chine) or override switches for spindle and feed (milling machine).
The display size and axis configurations are adjusted to these ap‐
plications so that the following solutions can be offered at optimal
costs:
DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
Bosch Rexroth AG 5/141
System Overview
To Next Page
Loading...
