Bosch Rexroth IndraMotion MTX micro - File Management

Fig.9-8: Text editor
Operation of the text editor is similar to that of editors known from the PC. Enter
the desired data using the ASCII keyboard and press <Enter> to move to a new
line. Move the cursor with the cursor keys (▲, ►, ▼, ◄).
Search function
The <Find> (F3) function allows searching for text passages (e.g., block num‐
ber, positions) in the open file. The <Next> (F4) and <Pre> (F5) functions
position the cursor to the next or previous search result, respectively.
Shortcuts
Useful shortcuts are available for the text editor. The related function is execu‐
ted when both keys are simultaneously pressed on the control panel:
● <Ctrl>+<Home> → positions the cursor to the beginning of the file
● <Ctrl>+<End> → positions the cursor to the end of the file
● <<Ctrl>+<Del> → deletes the line where the cursor is placed
● <Ctrl>+<Ins> → inserts a blank line at the cursor position
Editing functions
The <Edit> (F2) function opens another F-key row providing copy, cut and paste
editing functions. These functions can only be used within the open file.
File Management
All NC programs and other user data, e.g., diagnostic texts, are stored in ASCII
files in the file system of the IndraMotion MTX micro.
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
116/141
Operating the IndraMotion MTX micro