Bosch Rexroth IndraMotion MTX micro - Page 119

Fig.9-9: File system navigator
Open the <Program> operating area to create new files or edit existing files.
This automatically opens the navigator shown in the figure above. Operation of
the navigator is similar to that known from the PC programs. The left-hand win‐
dow shows the file system in a tree, and the right-hand window shows the files
of the currently selected directory. The bottom bar displays the current directory
and can be used to enter, e.g., a file name.
Selecting a directory
To select a directory, move to the file tree by pressing <TAB>. To open a di‐
rectory node (+), either wait for approx. 2 s after having placed the focus on it
or press <Enter>. Select the desired directory using the cursor keys (▲, ►, ▼,
◄). The right-hand window automatically shows the contents of the directory.
Creating a new program
Press <New> (F2) to create a new program after having selected the directory.
Then press <NCProg> (F3) to open the text editor for an NC program.
Editing a program
To open an existing file, move to the files list by pressing <TAB>. Select the file
using the cursor keys (▲, ►, ▼, ◄). To open the file, either press <Open> (F3) or
simply <Enter>. This automatically opens the appropriate editor.
DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
Bosch Rexroth AG 117/141
Operating the IndraMotion MTX micro