Rexroth IndraMotion MTX micro
Easy setup for Standard
Turning and Milling Machines
Commissioning Manual
DOK-MTXMIC-EASY*******-CO04-EN-P
RS-2108e8095cde7adf0a6846a0017a754a-1-en-US-2
This documentation gives
an overview of the components of the IndraMotion
MTX micro control system and supports the initial commissioning with handling
instructions and examples.
Edition
Release Date Notes
120-1450-B302/EN -01 07.2009 First edition not pusblish‐
ed
120-1450-B302/EN -02 12.2009 Revision of all chapters
120-1450-B302/EN -03 07.2010 Revision of all chapters
120-1450-B310/EN -04 09.2010 Replacement for DOK-
MTXMIC-EASY****V10-
COxx-EN-P,
R911330706
Copyright
© Bosch Rexroth AG 2010
Copying this document,
giving it to others and the use or communication of the
contents thereof without express authority, are forbidden. Offenders are liable
for the payment of damages. All rights are reserved in the event of the grant of
a patent or the registration of a utility model or design (DIN 34-1).
Validity
The specified data is for product description purposes only and may not be
deemed to be guaranteed unless expressly confirmed in the contract. All rights
are reserved with respect to the content of this documentation and the availa‐
bility of the product.
Published by
Bosch Rexroth AG
Bgm.-Dr.-Nebel-Str. 2 ■ 97816 Lohr a. Main, Germany
Phone +49 (0)93 52/ 40-0 ■ Fax +49 (0)93 52/ 40-48 85
http://www.boschrexroth.com/
Systementwicklung Werkzeugmaschinen, PeSc (SyMu/PiGe)
Note
This document has been printed on chlorine-free bleached paper.
Title
Type of Documentation
Document Typecode
Internal File Reference
Purpose of Documentation
Record of Revision
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
To Next Page
Loading...
