T
The T-function starts the tool search and the preparation in the PLC.
S1, S2
The S1, S2
functions serve to program the speed command value for spindles
1 and 2 and to automatically transfer the value to the spindle.
S
The S-function has the same behavior as the S1 function, with S200 corre‐
sponding to S1=200.
DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
Bosch Rexroth AG 69/141
PLC Startup
To Next Page
Loading...
