Bosch rexroth KCU02.2N-ET-ET*-025-NN-N-NN-NW - X156, Motor Connection

6.4.9 X156, motor connection
View Connection Signal name Function
U1, V1, W1 - Power output
PE - Equipment grounding conductor
5 MotTemp+ Temperature measurement input
6 MotTemp-
7 Br+ / +24V Output for controlling the motor holding
brake of the "applied without current"
type
8 Br- / 0V
9 GND_shld Shield
9-pin, female connector Unit Min. Max.
Output for controlling the motor holding brake (X156.7/8)
Output current (A) A
0.15
1)
1
Continuous power overvoltage protection (B) W n.s. 1.5
Energy absorption (B) Ws n.s. 3
Cable RKL4305
Allowed length m n.s. 7.5
1) With deactivated brake current monitoring: 0 A
Tab. 6-35: X156, motor
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
183/407
Connection points
R911335703_Edition 04 Bosch Rexroth AG