EasyManua.ls Logo

Bosch RF Series - Geothermal Closed-Loop Systems

Bosch RF Series
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specific Application Considerations
6.4 Geothermal Closed-Loop Systems
(Refer to Fig. 17)
Operation of an RF Series unit on a closed loop application
requires th
e extended range option.
NOTICE
Closed-loop and pond applications require specialized design
knowledge and specialized training.
Using Bosch Flow Centers makes the installation easier.
Anti-freeze solutions must be used when low loop temperatures
are expecte
d to occur.
Refer to the GLP installation manuals for more specific
instructions.
Fig. 17 Typical Geothermal System Setup
For Reference Only.
A typical setup is shown for illustration
purposes only.
[1] Unit Line Voltage Disconnect
[2] Flex Duct Connection
[3] Low-Voltage Control Connection
[4] Line-Voltage Connection (unit)
[5] P/T ports
[6] Vibration Pad
[7] Condensate Drain Connection
[8] Ground Loop Connection Kit
[9] Ground Loop Pumping Package
[10] Polyethylene with Insulation
[11] Control Panel/Thermostat
| 25
RF Series Heat Pumps — 8733980022 (2024/12)

Table of Contents