EasyManua.ls Logo

Bosch SM SERIES - 4 Environmental Protection and Saving; Disposing of Packaging; Saving Energy; Aquasensor

Bosch SM SERIES
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Environmental protection and savingde
4 environmental protection and
Save
4.3 Aquasensor1
The aqua sensor is an optical
measuring device (light barrier) that
measures the turbidity of the rinse
water. Water can be saved with the
aqua sensor.
The use of the aqua sensor is
program-specific. If the contamination
is low, the rinse water is used in the
next rinse cycle and water
consumption can be reduced by 3-6
liters. If the contamination is more
severe, the rinse water is pumped out
and replaced with fresh water. In the
automatic programs, the temperature
and running time are also adjusted to
the degree of contamination.
Protect the environment by using
your device in a resource-saving
manner and disposing of reusable
materials correctly.
4.1 Dispose of packaging
The packaging materials are
environmentally friendly and recyclable.
Dispose of the individual components
separately according to type.
You can obtain information about
current disposal routes from your
specialist dealer or your local or city
administration.
4.2 Save energy
If you follow these instructions, your
device will use less electricity and
water.
5 Set up and
Connect
Use the Eco 50° program.
To ensure proper operation, connect
the device to electricity and water
properly. Please note the required
criteria and the assembly
instructions.
aThe Eco 50° program is energy-
energy-saving and environmentally friendly.
"Programs", page 20
If you only have a few dishes to wash,
use the additional half load function.1
5.1 Scope of delivery
After unpacking, check all parts for
transport damage and that the
delivery is complete.
If you have any complaints, please
contact the retailer where you
purchased the device or our customer
service.
aThe program adapts to the
lower load and the consumption
values are reduced.
"Additional functions", page 23
A notice:The device was checked at the
factory to ensure that it functions
properly. This may leave water stains
on the device. The water stains
disappear after the first rinse.
1Depending on the device equipment
13

Table of Contents

Other manuals for Bosch SM SERIES

Related product manuals