servicede
b1
operation
5 basic ones
service
15.3 Setting the program
To adapt the washing cycle to how
dirty the dishes are, set a suitable
program.
▶ Press the appropriate program
button.
→
"Programs", page 20
service
15.1 Open the device door
1.If the parental controls1is not
activated, open the device door.
aThe program is set and
the program button flashes.
2.If the parental controls1is
activated, press the child lock tab
to the right and open the device
door.
15.4 Setting additional
functions
To complement the selected washing
program, you can set additional
functions.
1
A notice:The additional functions that
can be activated depend on the
program selected.
→
"Programs", page 20
2
▶ Press the button for the
appropriate additional function.
→
"Additional functions", page 23
aThe additional function is set
and the additional function button flashes.
15.2 Switch on the device
▶ press.
15.5 Setting the time delay
The Eco 50° program is preset.
The Eco 50° program is a
particularly environmentally friendly
program and is ideal for normally
soiled dishes. It is the most efficient
program in terms of the
combination of energy consumption
and water consumption for this type
of tableware and proves conformity
with the EU Ecodesign Regulation. If
you do not operate the device for 15
minutes, the device switches off
automatically.
You can delay the start of the
program for up to 24 hours.
1. press.
a"h:01" appears in the display.
2.Use or to set the desired program
start.
3. press.
aThe time delay is activated.
Tip:You can deactivate the time
delay by pressing or repeatedly
until “h:00” appears in the display.
1Depending on the device reimbursement
41
To Next Page
Loading...
